Service 15 / 27 · Detailed Engineering
Engineering Detail That Enables Execution.
Detailed engineering develops coordinated documentation for procurement, construction, installation and commissioning. Architecture, process, HVAC, utilities and electrical design are developed in parallel, coordinated in BIM and checked for clashes before issue. Specifications, datasheets and BOQs are prepared alongside the drawings so that tender packages reflect the same design.
Engineering phases
Where this service fits
03 / 09 phases in scope
- 01Feasibilitynot in scope
- 02Conceptnot in scope
- 03Basic Engineeringnot in scope
- 04Detailed EngineeringIn scope
- 05ProcurementIn scope
- 06ConstructionIn scope
- 07Commissioningnot in scope
- 08Validationnot in scope
- 09Operationnot in scope
Scope
What the service covers
- 01Architectural and cleanroom detailing
- 02Process, HVAC and utility design documentation
- 03Electrical design and control interfaces
- 04BIM coordination and clash detection
- 05Technical specifications, BOQs and RFQ packages
Method
From inputs to deliverables
INInputs
05 items- I01Approved basic engineering and design basis
- I02Final equipment selections or vendor data
- I03Room data sheets and user requirements
- I04Site survey and existing-building information where applicable
- I05Client standards and approval workflow
WORKActivities
06 items- W01Discipline design and calculations
- W02Multidisciplinary BIM coordination
- W03Clash detection and resolution
- W04Specification and BOQ preparation
- W05Design reviews and document issue
- W06Vendor technical evaluation support
OUTDeliverables
07 items- D-15.01Issued-for-construction drawing sets by discipline
- D-15.02HVAC calculations, air balance and pressure cascade
- D-15.03P&IDs, equipment schedules and datasheets
- D-15.04Single-line diagrams and load schedules
- D-15.05Coordinated BIM model with clash reports
- D-15.06Technical specifications and BOQs
- D-15.07RFQ packages and vendor technical evaluations
Technical detail
Deliverables by discipline
Contents · 07
01 / 07
Architecture
Room geometry, finishes and cleanroom details are resolved for cleanability, maintenance access and construction.
- Detailed layouts
- Room plans
- Sections
- Elevations
- Finishes
- Doors
- Ceilings
- Cleanroom details
02 / 07
Process
Process documentation defines equipment, connections and interfaces with the building and utilities.
- PFDs
- P&IDs
- Equipment layouts
- Equipment schedules
- Equipment datasheets
- Process interfaces
03 / 07
HVAC
Calculations, air balance and pressure cascade are developed from the room data and the zoning concept.
- HVAC calculations
- Air balance
- Pressure cascade
- AHU selection
- Duct layouts
- Filtration strategy
- Equipment schedules
- Control philosophy
04 / 07
Utilities
Utility loads are consolidated and routed to every consumer with coordinated distribution and piping.
- Utility loads
- Distribution layouts
- Piping
- Pipe sizing
- Utility equipment
- P&IDs
- Isometric coordination where applicable
05 / 07
Electrical
Power, lighting and control interfaces are designed around the equipment and process load list.
- Load schedules
- Single-line diagrams
- Power distribution
- Lighting
- Emergency power
- Equipment connections
- Control interfaces
06 / 07
BIM
All disciplines are coordinated in one model so that conflicts are resolved in design rather than on site.
- Multidisciplinary coordination
- Clash detection
- Model coordination
- Technical coordination
07 / 07
Procurement documents
Tender documents are prepared from the same design so that vendor offers can be compared on a consistent technical basis.
- Technical specifications
- BOQs
- Datasheets
- RFQ packages
- Vendor technical evaluation
Interactive engineering model
Explore how the engineering fits together.
Typical deliverables by discipline
Facility / Architecture
The spatial basis every other discipline builds on: how rooms, people, materials and waste move through the facility.
- ARC-01General arrangement layoutsDrawing
- ARC-02Zoning and classification plansDrawing
- ARC-03Personnel flowDrawing
- ARC-04Material flowDrawing
- ARC-05Waste flowDrawing
- ARC-06Room data sheets and room schedulesSchedule
Typical outputs; the actual deliverable list is agreed per project and per phase.
Deliverables
Typical documents and outputs
- D-15.01Issued-for-construction drawing sets by discipline
- D-15.02HVAC calculations, air balance and pressure cascade
- D-15.03P&IDs, equipment schedules and datasheets
- D-15.04Single-line diagrams and load schedules
- D-15.05Coordinated BIM model with clash reports
- D-15.06Technical specifications and BOQs
- D-15.07RFQ packages and vendor technical evaluations
Services
Related services
- 17
Process Piping
Process, sanitary and utility piping routed, sized and coordinated with every discipline.
Next step
Planning a pharmaceutical project?
Share the product type, the current stage and the main constraints. We will respond with a proposed scope and next steps.
+20 101 171 1700